To give you an idea as to how easy it is to operate the AUTOVIP by a single person as can be seen at the following links

Click below to see:
Ford Escort turned in a small area

Click below to see:
VW Golf Demo

Knock on Adaptors for Wire Wheels

Price
from £40.00/
set of 4


ADAPTOR BEAMS
to be able to turn a shell over
3 Adjustable beams in the kit

Price
from £75.00

AUTOVIP ROLLER

The design of the AUTOVIP ROLLER means that a vehicle can be mounted and tilted by A SINGLE PERSON,
using only a hydraulic jack on the jacking beam supplied with the kit.

The car can be turned with wheels ON or OFF
It can be turned even without axles Adaptor Beams can be purchased which enable the AUTOVIP ROLLER to turn your car, with or without axles and suspension, by bolting the beams to either bumper mounting or chassis. Fully adjustable.

The AUTOVIP is a cradle-frame which can be fitted quickly and easily to the wheel hubs of any car. The frame is tipped over to allow the user to work on the underbody while standing upright in perfect safety. You are never under the vehicle!

A brilliant and patented invention developed by a Danish engineer under the auspices of the Danish Institute of Technology, The AUTOVIP ROLLER offers great advantages:

  • Greatly improved working position
  • Unrestricted access to the underbody
  • No standing under the vehicle
  • No dirt in face and eyes while cleaning or rustproofing
  • Reduced risk of welding burns
  • Work in far better light

    This gives the mechanic, the car enthusiast and the DIY motorist the opportunity to:
  • Rustproof the underside.
  • Do steel plate work
  • Control/weld/repair mechanical parts such as suspension, shock absorbers, brake pipes, etc.
  • Change or repair exhaust systems

    • The Autovip Autoroller offers a choice of two models 1400 or 1700 They are both basically the same unit except the Autovip Roller 1700 has two locking mechanisms (one at the front and one at the rear to enable more stability for the heavier car). The Autovip Roller 1400 has one locking mechanism. Wheel supporting platforms can be purchased separately to enable two wheels to remain on the car when turning it over.

    A car can be turned in under 3 metres - place two smooth plates under the frame, then slide the car across. A car with knock on wheels can be turned by using adaptor beams which can be purchased as an optional extra. Min.width required 2.6m, 8ft.6ins. Height 2m,6ft.6ins.m